CYBEX 8800, Owner'S Manual

Page: 28 / 34

Product Number 8800/8810/8830/8840 Owner’s Manual
Maintenance
Page 5-4
1. Check all nuts and bolts for looseness. Tighten as required .
2. Inspect all cables for wear or damage and proper tension. When inspecting cables, run fi ngers on the cable,
paying particular attention to bends in cable and attachment points.
WARNING: Replace all worn cables immediately. The following conditions may indicate a worn cable:
A tear or crack in the cable sheath that exposes the cable. See Figure 1.
•
Weekly Procedures
Figure 1.
A kink in the cable. See Figure 2.
•
Figure 2.
A curled sheath. See Figure 3.
•
Figure 3.
“Necking”, a stretched cable sheath. See Figure 4.
•
Figure 4
.