CYBEX 772A, Owner'S Manual

Page: 5 / 86

Cybex Owner’s Manual
4 5
• Inspect unit. If damaged, notify floor staff. DO NOT USE.
• Do not remove this label. Replace if damaged or illegible.
During Use:
• Do not use for stretching and do not attach straps or other devices.
• Do not allow children 12 or younger to be on or near machine.
• Stop exercise if feeling faint, dizzy, or have pain.
• Use the handrails for support and to maintain balance.
• Keep all body parts, clothing, and accessories, clear of moving parts.
• Wait until foot plates come to a complete stop before getting off.
• Do not remove this label. Replace if damaged or illegible.
Facility Safety Precautions
It is the sole responsibility of the user/owner or facility operator to ensure that regular maintenance is
performed.
•
Enforce all user and safety precautions.
•
Read and understand the Owner’s Manual completely before assembling, servicing or using unit.
•
Verify all users are properly trained on using the equipment.
•
Do not use unit outdoors.
•
Verify that each unit is setup, leveled and operated on a solid level surface. Do not install equipment
on an uneven surface.
•
Verify there is enough room for safe access and operation of unit.
•
Use Cybex AC power adapters only.
•
Do not use the optional power adapter in damp or wet locations.
•
Do not use the unit if: (1) the unit is plugged into an optional power adapter that has a damaged
cord; (2) the unit is not working properly or (3) if the unit has been dropped or damaged. Seek
service from a qualified technician.
•
EQUIPMENT is not suitable for use in the presence of aerosol (spray), FLAMMABLE
ANAESTHETIC MIXTURE WITH AIR or WITH OXYGEN or NITROUS OXIDE.
•
Perform regular maintenance checks on unit. Performance level can be maintained only if
examined regularly. Pay close attention to all areas most susceptible to wear, including (but not
limited to) cables, pulleys, belts and grips.
•
Replace any warning labels if damaged, worn, or illegible.
•
Immediately replace worn or damaged components. If unable to immediately replace worn or
damaged components, then remove unit from service until repair is made.
•
Do not attempt electrical or mechanical repairs. Seek qualified repair personnel when servicing. If
you live in the USA, contact Cybex Customer Service at 888-462-9239. If you live outside the USA,
contact Cybex Customer Service at 508-533-4300.
•
Use only Cybex supplied components to maintain/repair unit.
•
Keep a repair log of all maintenance activities.
•
Disconnect the optional power adapter before servicing unit.
•
Do not use attachments unless recommended for the unit by Cybex.
•
The unit may generate electromagnetic or other forms of interference, or it may be affected by
interference from other equipment nearby. If this is suspected, take precautions by separating the
equipment or otherwise shielding it to avoid such interference.