![background image](http://html.mh-extra.com/html/cybex/19001/19001_owners-manual_2703529012.webp)
2.
Attach each Bar Catch (1 and 2) to desired position.
Qty
Description
1
Bar catch (RH)
1
1
Bar catch (LH)
2
1
Bar stop (RH)
3
1
Bar stop (LH)
4
Securely anchor machine to floor
Owner should not allow equipment to be used until it is properly anchored as described below.
Anchoring equipment:
• To maximize stability and eliminate rocking, tipping, or falling over,
equipment must be anchored to a solid, level surface, utilizing all anchoring
holes provided.
• Fasteners must have a minimum of 500 lbs. tensile capacity. Cybex
recommends .3/8” grade 2 bolts or better. A minimum pull force of 220
lbs/100 kgs is required for each anchor position.
• If leg frames do not contact surface, DO NOT pull down with anchors. Shim
any leg or frame not in contact with surface using flat washers.
• Due to the wide variation of flooring on which machines may be anchored
or installed, consult with a qualified and licensed contractor to ensure proper
anchoring and installation.
Verify proper operation
Page 12 of 19
Big Iron 19001/19011 Half Rack Part Number 19001-999-4 C