Cybex Computer Products AV416, Installer And User Manual, Page: 26 / 56

AutoView 424 Installer/User Guide
20
Basic Channel Maintenance is performed from the Administrator Command
Menu, and is available if you are operating in non-secure mode or if you are the
system administrator. Here you can add, delete or edit individual channels.
Adding Channels
1. Select ‘Add Channel’ from the Administrator Command Menu or press
the
Insert
key. Type in a new channel name, up to 14 characters long,
and press Enter .
2. Type in the address for the computer you are naming and press Enter .
Please note that the address cannot be longer than two digits. (For
cascaded addresses see ‘Keyboard Switching’ in Chapter 3.)
3. Enter the dwell time for the ID Window and press Enter .
4. Enter the dwell time for scanning and press Enter.
5. After selecting “ID Setup”, use the arrow keys to position the ID window
where you would like it to appear when this channel is selected. Then
press
Enter . (For further information see ‘The ID Window’ later in
this chapter.)
Press
Esc
at any point to exit this operation without adding the channel.
Basic Channel
Maintenance
THE ADD CHANNEL WINDOW
Scan Dwell Time 5
CYBEX Control Panel
Add Channel
Name
Address
ID Dwell Time 5
ID Setup
Save Changes
ENTER = activate ESC = exit