Cyberview scanner and thermal printer - Installation and User Manual
15 October 2007
Commercial-in-Confidence
Page 27 of 43
11.2 Removing foreign objects
If it becomes necessary to open the scanner case to remove, for example, an object that has fallen
into the scanner, proceed as instructed below.
1
2
Remove the scanner cover by lifting it from
the main unit.
Locate the plastic case release latches inside
the scanner. Gently pull them to release the rear
casing. Once released, remove the rear casing.
3
4
Hold the scanner internal mechanism as
shown and swing it up at a slight angle.
Extract the scanner mechanism by pulling it to
the back.
Closing scanner housing
1
2
Slide scanner mechanism into casing at a
slight angle. Secure the mechanism so that
the front vibration dampeners are secured
onto the scanner housing.
Replace the rear cover ensuring that the rear
vibration dampeners are properly engaged.
Snap-in the rear cover latches.
Replace the scanner cover.
Front vibration
dampeners