Shenzhen Zhiyong Electronics Co., Ltd
7
7. Receiver Mode
Receiver mode main interface
Mark Num.
Name
Description
1
Preset button
Set the software to default status
2
Start or stop scanning
Do not change setting during scanning, proceed to set after scanning
stopped.
3
Edit scan result
Can edit scanned data, including locate peak value, add or delete
frequency point and zoom in/out
4
Final test
Can proceed final test to the frequency point in data sheet
5
Quick report generation
Generate test report fast
6
Spot test function
Enter Spot mode, test for single point
7
Scan mode switch
Switching between time domain and step scanning.
8
Return
Return to previous menu
Sheet 5: Receiver Mode Main Interface
Receiver mode quick operating steps
①
Scan mode setting and testing
Press
to enter receiver mode. (Receiver mode is default setting)
Set “starting frequency”, “stopping frequency”, “single point testing time under scanning mode”,
“single point testing time under final test mode” and “Margin”. (Please refer to sheet 4 for setting
method)
Select test limit. Press
button to display menu. Select “Set”---“limit”---“select limit” to
choose limit required and confirm. Please refer to “How to draw limit curve” for further detail about
adding new limit.
CYBERTEK
