CyberResearch STH 15B Series, User Manual

Page: 59 / 130

User Manual version 4.11
STH 15B Series
5-47
Expansion Slots
The STH 15B Series provides PCI/ISA expansion slots for
system expansion. Via the specially designed riser card, the
system can accommodate either two PCI or one ISA and one
PCI expansion cards.
Due to the internal space limitation, there is card size
limitation.
If PCI expansion cards are used, the card size cannot exceed
the following.
1
st
PCI card: 290*120 mm (L*W)
2
nd
PCI card: 160*120 mm (L*W)
1. Detach and remove the rear cover. Remove the system
metal cover located at the upper side of the chassis.
2. Invert the system compartment to make the upper side of
the chassis to be lower side.
3. Now, from your point of view, the riser
card is located at the left bottom side of
the system compartment.
4.
Unscrew the 2 metal slips located inside
the expansion outlet.
5. Plug the expansion cards into the PCI slot on the riser card
and fix the expansion card by screwing it to the metal
expansion frame. All the connectors of the expansion card
will come out from the expansion outlet on the left side of
the chassis for further cable connection.