CyberResearch CYRAQ 17A Series, User Manual

Page: 28 / 56

C
Y
RAQ 17A Series
CyberResearch
®
Displays
18 ©
Copyright 2007
CyberResearch, Inc
3
N
OTE
: If the screen remains blank or displays the error message “Out of
Range” or “No Input Signal,” there may be a connection or signal
problem. One or a combination of the possibilities listed below may be
the cause:
¾ Windows resolution is set either too high or two low for the display;
check the resolution by reinstalling the old monitor
¾
The refresh rate may be set too high. The refresh rate of an LCD
monitor doesn’t need to be set as high as a CRTs refresh rate; set the
refresh rate @ 60Hz.
¾ The power source isn’t connected correctly.
¾ The video cables aren’t tightly connected at one or both ends;
reconnect and tighten the cable adapter screws.
¾ The display is reading an input without a connected source; push Input
Select button to access the correct input.
¾ The unit is malfunctioning.