CyberResearch CYRAQ 17A Series, User Manual

Page: 24 / 56

C
Y
RAQ 17A Series
CyberResearch
®
Displays
14 ©
Copyright 2007
CyberResearch, Inc
2.3 Panel Mounting
Prior to performing subsequent steps, ensure the panel-mounting location (including
panel thickness) is suitable for the C
Y
RAQ
®
17A, and meets Environmental requirements
in the General Specifications section.
3
N
OTE
: Panel thickness should not exceed: .55" (14.1mm) if the unit has the standard
3.2mm (1/8
"
) Poron™ gasket installed. Suggested panel thickness is calculated based on
standard C
Y
RAQ 17 parts and dimensions, custom units may not meet these
specifications. Prior to panel mounting a C
Y
RAQ 17A, the included gasket must be
affixed to the rear of the enclosure.
2.3.1
Panel Mounting the Monitor
1. Cutout dimensions are: 15.12" (384mm) W x 13.62" (346mm) H for portrait
installation.
2. Install C
Y
RAQ 17 in panel cut out. Ensure Poron
™
gasket on the rear of the unit is
flush against panel (critical for NEMA compliance).
- - - Illustrations Begin On Next Page - - -