CyberResearch CPGN C2-30-X, User Manual

Page: 87 / 122

©Copyright 2011 CyberResearch, Inc. 87
Enabled Remote access configuration options shown
below appear:
Serial Port Number
Serial Port Mode
Flow Control
Redirection after BIOS POST
Terminal Type
These configuration options are discussed below.
S e ria l P o rt N u m b e r [C O M 1 ]
Use the Serial Port Number option to select the serial port used for remote access.
COM1 D
EFAULT
System is remotely accessed through COM1
COM2 System is remotely accessed through COM2
NOTE : Make sure the selected COM port is enabled through the Super I/O configuration
menu.
B a s e A d d re s s , IR Q [2 F 8 h ,3 ]
The Base Address, IRQ option cannot be configured and only shows the interrupt
address of the serial port listed above.
S e ria l P o rt M o d e [1 1 5 2 0 0 8 ,n ,1 ]
Use the Serial Port Mode option to select baud rate through which the console
redirection is made. The following configuration options are available
115200 8,n,1 D
EFAULT
57600 8,n,1
38400 8,n,1
19200 8,n,1
09600 8,n,1