CyberResearch CPGN C2-30-X, User Manual

Page: 70 / 122

70 ©Copyright 2011 CyberResearch, Inc.
CPGN CPU Card
Enhanced D
EFAULT
Configures the on-board ATA/IDE controller to be in
Enhanced mode. In this mode, IDE channels and
SATA channels are separated. This mode supports up
to 6 storage devices. Some legacy OS do not support
this mode.
C o n fig u re S A T A a s [ID E ]
Use the Configure SATA as option to configure SATA devices as normal IDE devices.
IDE D
EFAULT
Configures SATA devices as normal IDE device.
C o n fig u re S A T A C h a n n e ls [B e h in d P A T A ]
Use the Configure SATA Channels option to determine how SATA channels and PATA
channels are ordered.
Before PATA Puts SATA channels before PATA channels.
Behind PATA D
EFAULT
Puts SATA channels behind PATA channels.
ID E M a s te r a n d ID E S la v e
When entering setup, BIOS automatically detects the presence of IDE devices. BIOS
displays the status of the automatically detected IDE devices. The following IDE devices
are detected and are shown in the IDE Configuration menu:
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Third IDE Slave
The IDE Configuration menu ( BIOS Menu 4 ) allows changes to the configurations for
the IDE devices installed in the system. If an IDE device is detected and one of the above
listed four BIOS configuration options are selected, the IDE configuration options shown
in Section 5.3.2.1 appear.