CyberResearch CPGN C2-30-X User Manual Download Page 118

Page: 118 / 122

118

CyberResearch, Inc.

CPGN CPU Card

E.1 H

Hazardous Materials Disclosure Table for IPB

Products Certified as RoHS Compliant Under
2002/95/EC Without Mercury

The details provided in this appendix are to ensure that the product is compliant with the

Peoples Republic of China (China) RoHS standards. The table below acknowledges the

presences of small quantities of certain materials in the product, and is applicable to

China RoHS only.

A label will be placed on each product to indicate the estimated “Environmentally Friendly

Use Period” (EFUP). This is an estimate of the number of years that these substances

would “not leak out or undergo abrupt change.” This product may contain replaceable

sub-assemblies/components which have a shorter EFUP such as batteries and lamps.

These components will be separately marked.

Please refer to the table on the next page.

Summary of Contents for CPGN C2-30-X










































































































Search results

Summary of Contents for CPGN C2-30-X

Reviews:

Brands by name

Popular brands

CyberResearch CPGN C2-30-X, User Manual

Search results

Summary of Contents for CPGN C2-30-X

Reviews:

Brands by name

Popular brands