9
Installation on Text Mode
When the system does not support graphic mode, the Linux installation needs to be initiated in the terminal by
using the
./ppbe-linux-x86.sh -c
command on 32-bit systems or use
./ppbe-linux-x86_64.sh -c
command
on 64-bit systems.
The installation procedure will be initiated as following steps:
Press
Enter
to start an installation.
Accept the license agreement.
Choose the component.
In order to simultaneous monitor multiple PDU, Center should be installed. If
one single computer which is powered by the PDU requiring protection, Client should be installed.
Note:
Agent
should be not selected because of ability to access to UPS instead of PDU.
Choose the destination location.
Installation procedure starts and once finished. It will end automatically.
Installation on VMware ESXi and ESX
Installation on ESXi
Installation must be launched in the
vMA
(
vSphere Management Assistant
) which is also a virtual machine
on the ESXi host.
In order to deploy vMA on the ESXi host and install PPBE in the vMA, users must install the
vSphere Client
tool on another remote computer first. To download the vSphere Client installer, users can
