14
accurately, you must change the time zone settings of the virtual appliance.
This can be a direct copy of the time zone file from the
/usr/share/zoneinfo
folder. We assume that the
host is located under the Chicago CST zone in Chicago, and the time zone can be changed by running
the command
cp /usr/share/zoneinfo/America/Chicago
/etc/localtime
.
Installation on XenServer
The installer requires root permission to install the PowerPanel
®
Business Edition. Mount CD by running
mount -t iso9660 /dev/cdrom /mnt/cdrom
as a root user (
/dev/cdrom
is the CD drive and
/mnt/cdrom
will
be the mount point.). Browse the CD drive and run
./ppbe-linux-x86.sh
command to initiate an installation
procedure.
Installation must be launched on the
Dom0
.
Refer to Installation on Text Mode section to complete the
installation.
Installation on Hyper-V Server
Use the PowerPanel
®
Business Edition installation CD to complete the installation on the target computer.
Run the
<
CD_Drive>\Software\Windows\setup.exe
of the command prompt such as below illustration to
start the installation procedure (
CD_Drive
is a CD drive formatted as
D:
or
E:
). A popup window will be
displayed when the installation is launched. Refer to
Installation on Windows
section to follow the same
steps to complete installation.
Access PowerPanel
®
Business Edition Software Interface
To access the PowerPanel
®
Business Edition interface in Windows, go to
Start > All Programs >
CyberPower PowerPanel Business Edition > PowerPanel Business Edition Center
(or
PowerPanel
