CyberPower HT705GR User Manual Download Page 8

Copyright ©2018 Cyber Power Systems (USA), Inc. All rights reserved.

Cyber Power Systems (USA), Inc.

 | www.CyberPowerSystems.com 

For USA and Canada

 | 4241 12th Ave East, Suite 400, Shakopee, MN 55379 | Toll-free: 877.297.6937 

For all other regions

 | Please visit our website for local contact information.

This device is manufactured using environmentally safe procedures in compliances 
with the Restrictions on Hazardous Substances (RoHS) directive.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may 
not cause harmful interference, and (2) this device must accept any inference received, including interference that may be 
undesired operation. This equipment has been tested and found comply with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. 

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 
one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

•  Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s 
authority to operate the equipment.

ICES-003: This Class B digital apparatus complies with Canadian ICES-003.

 WARNING: This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS), which is known to the State of 

California to cause reproductive harm and cancer. For more information, go to www.p65warnings.ca.gov.

Summary of Contents for HT705GR









Reviews: