©2018 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners.
1
HT705GR
QUICK START GUIDE:
(SEE QUICK START GUIDE)
1. Connections:
Turn power switch to OFF. Plug surge protector into wall. Plug powered-down electronic
devices in to appropriate outlets. Connect infrared (IR) sensor to surge protector into small input jack.
Place glossy side of IR sensor in sightline of remotes. Turn power switch to ON using green rocker
switch. LED indicators (Protected & Grounded) should illuminate.
2. Power-Saving Measurement Initialization:
The HT705GR performs a power-saving detection
measurement after the green rocker switch is turned ON. The Energy-Saving outlets will be turned on
for 10 seconds, and the energy-saving LED indicator will illuminate at the same time. After initialization
is complete, the Energy-Saving outlets and energy-saving LED indicator will turn OFF, and the unit is
available for use. To reset the measurement of your power consumption, press and hold the IR sensor
button for more than 10 seconds, release, and this will trigger a new energy-saving measurement of the
connected equipment.
3. The Energy-Saving Timer:
The energy-saving timer monitors the time period of power delivery to the
Energy-Saving outlets. The timer has a default setting of 1 hour. If the timer does not receive any IR
signal during this window, it will turn off Energy-Saving outlets.
4. Operation:
Turn TV ON. Power ON all connected equipment. When the IR sensor receives IR signals,
the Energy-Saving outlets will power on. The IR sensor’s blue LED light will blink for 15 minutes after 1
hour after last click of remote to give user a notice of shutdown. Click any button on a TV remote or the
volume button on a cable provider’s remote to restart energy-saving timer at zero. Blue LED light will
stop blinking.
5. Setting the Energy-Saving Timer:
If you want to change the energy-saving time window, hold the IR
sensor button down for 7 seconds; LED light will flash 3 times, release. Press IR sensor 1 time. LED light
will flash 1 time, and timer will be 1 hour. Hold the IR sensor button down for 7 seconds. LED light will
flash 3 times, release. Press IR sensor 2 times, pausing in between. LED light will flash 2 times, and timer
will be 2 hours.
6. Timer Shut-Down:
When the timer expires, the IR sensor will continue to flash for 15 minutes, then the
Energy-Saving outlets will power off.
