background image

PRODUCT REGISTRATION 

Thank you for purchasing a CyberPower product. This UPS is designed to provide unsurpassed 

power protection, operation, and performance during the lifetime of the product. Please take a 

few minutes to register your product at: 

www.CyberPowerSystems.com/registration

Registration certifes your product’s warranty, confrms your ownership in the event of a product 

loss or theft, and entitles you to free technical support. Register your product now to receive the 

benefts of CyberPower ownership. 

IMPORTANT SAFETY WARNINGS 

(SAVE THESE INSTRUCTIONS)

This manual contains important safety instructions. Please read and follow all instructions carefully 

during installation and operation of the unit. Read this manual thoroughly before attempting to 

unpack, install, or operate your UPS. 

CAUTION! 

 To prevent the risk of fre or 

electric shock, install in a temperature and 

humidity controlled indoor area free of 

conductive contaminants. (Please see 

specifcations for acceptable temperature 

and humidity range). 

CAUTION!

 To reduce the risk of electric shock, 

do not remove the cover. There are no user-

serviceable parts inside. 

CAUTION!

 Hazardous live parts inside can be 

energized by the battery even when the AC 

input power is disconnected. 

CAUTION!

 The UPS must be connected to an 

AC power outlet with fuse or circuit breaker 

protection. Do not plug into an outlet that is 

not grounded. If you need to de-energize this 

equipment, turn of and unplug the unit. 

CAUTION!

 To avoid electric shock, turn of the 

unit and unplug it from the AC power source 

before connecting equipment to the unit. 

CAUTION!

 To reduce the risk of fre, connect 

only to a circuit provided with 20 amperes 

maximum branch circuit over current 

protection in accordance with the National 

Electric Code, ANSI/NFPA 70. 

CAUTION!

 Not for use in a computer room as 

defned in the Standard for the Protection of 

Electronic Computer / Data Processing 

Equipment, ANSI/NFPA 75. 

CAUTION!

 Do not open or mutilate batteries. 

Released electrolyte is harmful to the skin and 

eyes. It may be toxic. 

DO NOT USE FOR MEDICAL 

OR LIFE SUPPORT EQUIPMENT! 

CyberPower Systems does not sell products 

for life support or medical applications. 

DO NOT use in any circumstance that would 

afect operation and safety of life support 

equipment, any medical applications or 

patient care. 

DO NOT USE WITH OR NEAR AQUARIUMS! 

To reduce the risk of 

fi

re or electric shock, do 

not use with or near an aquarium. 

Condensation from the aquarium can cause 

the unit to short out. 

DO NOT USE THE UPS 

ON ANY TRANSPORTATION! 

To reduce the risk of 

fi

re or electric shock, do 

not use the unit on any transportation such 

as airplanes or ships. The efect of shock or 

vibration caused during transit and the damp 

environment can cause the unit to short out. 

CAUTION!

 Do not dispose of batteries in a fre. 

The batteries may explode. 

Summary of Contents for CST150XLU










Reviews: