Copyright © 2012 CyberPower Systems, Inc.
Mounting the
On-grid Solar Power Generating System
8
Mount the On-grid Solar Power Generating System
Make sure the supporting surface is strong enough to handle 60
kg (133lb) for the On-grid Solar Power Generating System.
Step1: Fix the wall mount bracket
Use the attached screws / Self-tapping screws: M6*20L (5pcs)
Step2: Put the On-grid Solar Power Generating System on the
wall mount bracket
Step3: Make sure the host of On-grid Solar Power Generating
System on the incision of the wall mount bracket
Step4: Move the On-grid Solar Power Generating System from
right to left side, and make sure the hole is locked with wall
mount
bracket.
Step5: Use cable ties, and fix the On-grid Solar Power
Generating System with wall mount bracket.
WARNING! Equipment damage Shock hazard
If your installation location requires that you drill additional
conduit holes into the bracket, ensure that there are no metal
shavings left inside the unit. These could cause a short circuit
when unit is operating.
!
Summary of Contents for CPSPV2000ETL-IN SLV
Page 2: ...www cpsww com ...
