Other problems
The Tablet does not
respond.
To turn off your Tablet, press and hold the power
button for 4 seconds or more. If the Tablet still
does not respond, remove the AC adapter.
Your Tablet might lock when it enters sleep mode
during a communication operation.
See the Boot menu of BIOS setup utility. Make
sure that the Boot priority order in the BIOS setup
utility is set so that the Tablet starts from the device
you want.
Also make sure that the device from
which the Tablet starts is enabled. In the Boot menu
in the BIOS setup utility, make sure that the device
is included in the Boot priority order list.
Press F11 when the notes appear on the screen
while the Tablet is starting up to select the device
you want the Tablet to start from.
Do not connect or disconnect any external device
cables other than a USB cable while the Tablet
power is on; Otherwise, you might damage your
Tablet.
When using a high power consumption external
device such as an external USB optical disk drive,
use an external device power adapter. Otherwise,
the device may not be recognized, or system
shutdown may result.
The Tablet does not
start from the desired
device.
The connected external
device does not work.
CyberMed T10C/T10C Tablet
Page 15
Troubleshooting
Summary of Contents for T10C
Page 1: ......