Sleep or hibernation problems
The Tablet enters sleep
mode unexpectedly
If the processor overheats, the Tablet automatically
enters sleep mode to allow the Tablet to cool and
to protect the processor and other internal
components. Check the settings for sleep mode.
Make sure that:
- The battery is charged.
- The operating temperature is within the
acceptable range.
The Tablet enters sleep
mode immediately after
Power-on self-test ( POST ).
Note:If the battery is charged and the temperature is within range, have the Tablet
serviced.
The critical low-battery
error message appears,
and the Tablet immediately
turns off.
The Tablet does not return
from sleep mode and does
not work.
The battery power is getting low. Connect the AC
adapter to the Tablet.
If the Tablet does not return from sleep mode, it
may have entered hibernation mode automatically
because the battery is depleted. Check the power
indicator.
If your Tablet is in sleep mode, connect the AC
adapter to the Tablet, then press the screen or
the power button.
If your Tablet is in hibernation mode or power-off
state, connect the AC adapter to the Tablet, then
press the power button to resume operation.
Note:If the system still does not return from sleep mode, your system has stopped
responding, and you cannot turn off the Tablet, reset the Tablet. However,
unsaved data may be lost. To reset the Tablet, press and hold the power button
for 4 seconds or more. If the Tablet is still not reset, remove the AC adapter
and the battery.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
CyberMed T10C/T10C Tablet
Page 13
Troubleshooting
Summary of Contents for T10C
Page 1: ......
