DOC ID: 16000400
Page | 11
WARNING
:
To avoid risk of electric shock, this equipment must only be connected to a
supply mains with protective earth.
Disconnect Device
▪
To fully disengage the power to the unit, please remove all the batteries (for NB
series) first before disconnecting the power cord from the AC inlet.
Environmental Factors
▪
Operating Temperature:
0°C to 35°C
; Non-operating temperature: -
20°C to 60°C
.
▪
Operating Humidity (Non-Condensing): 10% to 90%. Non-operating Humidity
(Non-condensing): 10% to 90%.
▪
Pressure: 700 to 1060hPa (0-3000m)
▪
Do not insert objects into the openings.
▪
Do not allow liquids to seep into the internal areas of the AIO PC.
▪
Having liquids seep in or inserting objects into the unit may result in electric
shock and/or short circuiting the internal parts.
▪
Do not place the AIO PC in the presence of high moisture areas.
▪
Do not install the AIO PC in a wet environment.
▪
Do not place unit near heat generating sources.
▪
Do not place the unit in a location where it will come in contact with excessive
fumes or steam.
▪
Remember to keep the AIO PC away from the presence of excessive dust.
▪
If water has seeped in, immediately disconnect the Power- Then contact a
service technician for repairs.
Ventilation Spacing
▪
This unit is sealed and there are no openings on front. The rear I/O area is
exposed and may allow liquid ingress, however due to the angle it is unlikely.
Summary of Contents for CyberMed NB20
Page 1: ......
Page 15: ...DOC ID 16000400 CyberMed iOne NB20 Series Overview ...
Page 31: ...DOC ID 16000400 Appendices ...
