Cybernet CyberMed NB20, User Manual

Page: 11 / 36

DOC ID: 16000400 Page | 10
1. When moving the unit on a cart, be cautious. Quick stops, excessive forces, and
uneven surfaces may cause the cart to overturn, risking the unit to fall.
2. If the NB20 does fall to the ground, immediately turn the power off and
disconnect cords. Then contact a service technician for repairs. Continual use of
the NB20 may result in a fire or electric shock. Also, do not repair the unit on your
own.
3. Having two or more people transporting and/or installing the NB20 is
recommended.
4. Before suspending the unit, make sure the material used for suspension is sturdy
and stable. If not properly suspended, the NB20 may fall and cause serious injury
to people standing nearby as well as to the unit itself.
5. If the user wishes to mount the NB20, remember to use only the mounting
hardware recommended by the manufacturer.
Electrical and Power Source Related
▪
The NB20 can be operated on batteries or through the included external power
adapter with AC input between 110V-240V .
▪
The power cords must not be damaged. Applied pressure, added heat, and
tugging may damage the power cord.
▪
The power cord must be routed properly when setup takes place to prevent
workplace hazards and potential damage to the NB20.
▪
Do not overload the AC outlets or extension cords. Electrical shocks or fires may
occur from overloading.
▪
Do not touch the power source during a thunderstorm.
▪
If your hands are wet, do not touch the plug.
▪
Use your thumb and index finger, grip firmly on the power cord to disconnect
from the electrical socket. By pulling the power cord, may result in damaging it.
▪
If the unit is not going to be in use for an extended period of time, remember to
disconnect the unit.
▪
The NB20 uses 19V DC output from an adapter. Connect the unit to a power
source with the same numerical value as indicated. Please use only the power
cord provided by the dealer to ensure safety and EMC compliance.