CyberMed H24 Series, User Manual

Page: 10 / 36

H24 Series
Page 4
Intended use
The H24 Series is designed for general pc application purpose for hospital environment
and for diagnosis. It could be used for Radiology, PACS (Picture Archiving
Communication Systems),LIS (Lab Information Systems) and Electronic Medical
Recordpurpose. It shall not be used for life-supporting system.
WARNING: Critical diagnostic decision must not be based solelyon images displayed by
this device.
Unpacking
After opening the carton, there is the LCD PC with an accessory box. Check carefully to
see if there are any damages ormissing parts.
Read the Manual
Please read this manual carefully and remember to keep thismanual for future reference.
Safety Instructions & Cleaning
This product has undergone various tests in order to comply withsafety standards.
Inappropriate use or open the housing may bedangerous. Please remember to follow the
instructions below toensure your safety during the installation and operating process.
Transporting & Placement of unit
1. When moving the unit on a cart; be very cautious. Quickstops, excessive forces and
uneven surfaces may causethe cart to overturn thus risking the unit to fall to the
ground.
2. If the LCD PC unit does fall to the ground,immediately turn the power off and
disconnect cords. Thencontact a service technician for repairs. Continual use of
the unit may result cause a fire or electric shock. Also, donot repair the unit on your own.
3. Having two or more people transporting the LCD PC unit is recommended. In addition,
when installing theunit by suspending it also requires two or more people.
4. Before suspending the unit, make sure the material usedfor suspension is sturdy and
stable. If not properly suspended, the LCD PC unit may fall and causeserious injury to
people standing nearby as well as to theunit itself.
5. If the user wishes to mount the LCD PC unit, rememberto use only the mounting
hardware recommended by themanufacturer.