Setting Up the V3 Paging Server
Configure the Autoprovisioning Parameters
CyberData Corporation
930427L
Operations Guide
58
Note
You must click on the
Save
button and then the
Reboot
button for the changes to take
effect.
2.4.13.1 Autoprovisioning
On boot, the device will look for an autoprovisioning server configured on the
Autoprovisioning
Configuration Page
or specified as a DHCP option. When it finds a server, it will try to download the
following (in order of preference):
1. The file configured on the autoprovisioning page.
2. A file named according to it's mac address (for example: 0020f7350058.xml).
3. The file 000000cd.xml
The file can be hosted using a standard web server (like apache, IIS, or nginx), and the device can
download over SSL. The file server can be an ipv4 address in dotted decimal notation or a fully
qualified domain name.
By default, the device will get its autoprovisioning server from the DHCP options. See
Section
2.4.13.2, "Sample dhcpd.conf"
for an example of how to configure dhcpd to offer autoprovisioning
server addresses. If multiple options are set, the device will attempt to download autoprovisioning
files from every server.
Posix Timezone String
See
Section 2.4.13.4, "Time Zone Strings"
for information about
how to use the Posix Timezone String to specify time zone and
daylight savings time where applicable. Enter up to 63
characters.
Set Time with NTP Server on boot
When selected, the time is set with an external NTP server when
the device restarts.
Periodically update with time server
When selected, the time is periodically updated with the NTP
server at the configured interval below.
Time update period (in hours)
The time interval after which the device will contact the NTP
server to update the time. Enter up to 4 digits.
Allows you to set the time from the NTP server.
Current Time
Current Time (UTC) in 24 hour format
(
HHMMSS
)
Allows you to input the current time in the 24 hour format.
(6 character limit)
Click on this button to set the clock after entering the current
time.
Click on the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Reboot
button to reboot the system.
Table 2-14. Autoprovisioning Configuration Parameters (continued)
Web Page Item
Description
