Setting Up the V3 Paging Server
Confirm that the V3 Paging Server is Up and Running
CyberData Corporation
930427L
Operations Guide
11
2.3.5 Confirm that the V3 Paging Server is Up and Running
The LEDs on the front of the V3 Paging Server verify the unit’s operations.
Figure 2-7. Paging Server LEDs
2.3.5.1 Confirm Power on, Network Connectivity, and Connection Speed
When you plug in the Ethernet cable or power supply:
•
The
GREEN
/
BLUE
Status
LED and the
GREEN
Paging
LED both blink at a rate of 10 times
per second during the initial network setup.
•
The round,
GREEN
/
BLUE
Status
LED on the front of the V3 Paging Server comes on indicating
that the power is on. Once the device has been initialized, this LED blinks at one second
intervals.
•
The square,
GREEN
/
AMBER
Link
LED above the Ethernet port indicates that the network
connection has been established. The Link LED changes color to confirm the auto-negotiated
connection speed:
•
The Link LED is
GREEN
at 10 Mbps.
•
The Link LED is
AMBER
at 100 Mbps.
•
The
GREEN
Paging
LED comes on after the device is booted and initialized. This LED blinks
when a page is in progress. You can disable
Beep on Initialization
on the
Device
Configuration
page.
2.3.5.2 Verify Network Activity
The square,
GREEN
Activity
LED blinks when there is network traffic.
Status
(
GREEN
/
BLUE
LED)
Paging
(
GREEN
LED)
Link
(
GREEN
/
AMBER
LED)
Activity
(
GREEN
LED)
