Installing the Singlewire InformaCast Indoor Intercom with Keypad
Configure the Autoprovisioning Parameters
Operations Guide
931640A
CyberData Corporation
89
2. On the
Autoprovisioning
page, you may enter values for the parameters indicated in
Note
The question mark icon (
) in the following table shows which web page items will be defined
after the
Toggle Help
button is pressed
.
Web Page Item
Description
Enable Autoprovisioning
The device will automatically fetch a configuration file, also known as the
'autoprovisioning file', based on the configured settings below.
Autoprovisioning Server
Enter the IPv4 address of the provisioning server in dotted decimal notation.
Autoprovisioning Filename
The autoprovisioning filename is the configuration filename. The default
autoprovisioning filename is in the format of
<mac address>.xml
.
Supported filename extensions are .txt, and .xml. The current filename is denoted
by an asterisk at the bottom of the
. Enter up to 256
characters.
A file may have any name with an xml extension. If a file name is entered, the
device will look for the specified file name, and only that file.
Use tftp
The device will use TFTP (instead of http) to download autoprovisioning files.
Verify Server Certificate
When using ssl to download autoprovisioning files, reject connections where the
server address doesn't match the server certificate's common name.
Username
The username used to authenticate with an autoprovisioning server. Leave this
field blank to disable authentication.
Password
The password used to authenticate with an autoprovisioning server. Leave this field
blank to disable authentication.
Autoprovisioning Autoupdate
(in minutes)
The reoccurring time (in minutes) the device will wait before checking for new
autoprovisioning files. Enter up to 6 digits. A value of 0 will disable this option.
Autoprovision at time (HHMMSS)
The time of day the device will check for a new autoprovisioning file. The time must
be 6 characters in length and in HHMMSS format. An empty value will disable this
option.
Autoprovision when idle
(in minutes > 10)
The idle time (in minutes greater than 10) after which the device will check for a
new autoprovisioning file. Enter up to 6 digits. A value of 0 will disable this option.
Click the
Save
button to save your configuration settings.
Click on the
Reboot
button to reboot the system.
Click on the
Toggle Help
button to see a short description of some of the web
page items. First click on the
Toggle Help
button, and you will see a question mark
(
) appear next to some of the web page items. Move the mouse pointer to hover
over a question mark to see a short description of a specific web page item.
Press the
Download Template
button to create an autoprovisioning file for the
device. See
Section 2.4.17.3, "Download Template Button"
Autoprovisioning log
The autoprovisioning log provides information about the latest autoprovisioning
attempt (i.e. dhcp options and server accessed and files parsed or not found).
Table 2-25. Autoprovisioning Page Parameters
