Installing the Singlewire InformaCast Indoor Intercom with Keypad
Configure the Button Parameters
Operations Guide
931640A
CyberData Corporation
41
Note
While in
Security Mode
, the 011375 Network Dual Door Strike Relay will operate only in
Automatic Mode
.
2.4.6.1 Dial Out Extension Strings and DTMF Tones (using rfc2833)
On the
Button Configuration
page, dial out extensions support the addition of comma delimited
pauses and sending additional DTMF tones (using rfc2833). The first comma will pause three
seconds after a call is first established with a remote device. Subsequent commas will pause for 2
seconds. A pause of one second will be sent after each numerical digit.
Extension String
Resulting Action
Note
The maximum number of total characters in the dial-out field is 25.
Keypad 8
Dial this extension when the 8 key is pressed.
Keypad 9
Dial this extension when the 9 key is pressed.
Keypad 0
Dial this extension when the 0 key is pressed.
Keypad *
Dial this extension when the * key is pressed.
Keypad #
Dial this extension when the # key is pressed.
Call Button
Dial this extension when the call button is pressed.
Button Tones
Play Button Tones
Play a tone when the keypad buttons are pressed.
Click the
Save
button to save your configuration settings.
Click on the
Reboot
button to reboot the system.
Click on the
Start
button to start a button test.
Click on the
Toggle Help
button to see a short description of some of the web page
items. First click on the
Toggle Help
button, and you will see a question mark (
) appear
next to some of the web page items. Move the mouse pointer to hover over a question
mark to see a short description of a specific web page item.
Table 2-9. Button Configuration Parameters (continued)
Web Page Item
Description
Table 2-10. Examples of Dial-Out Extension Strings
302
Dial out extension 302 and establish a call
302,2
Dial out extension 302 and establish a call, wait 3 seconds then send the
DTMF tone '2'
302,25,,,4,,1
Dial out extension 302 and establish a call, wait 3 seconds then send the
DTMF tone '2', send out DTMF tone 5, wait 6 seconds, send out DTMF
tone 4, wait 4 seconds, send out DTMF tone 1
