CyberData 011460, Operation Manual, Page: 28 / 88

Operations Guide 931475A CyberData Corporation
Installing the SIP Weatherproof Keypad Phone
Setting up the Device
22
2.3.10 Log in to the Configuration Home Page
1. Open your browser to the SIP Weatherproof Keypad Phone IP address.
Note If the network does not have access to a DHCP server, the device will default to an IP
address of 10.10.10.10.
Note Make sure that the PC is on the same IP network as the SIP Weatherproof Keypad Phone.
Note You may also download CyberData’s VoIP Discovery Utility program which allows you to
easily find and configure the default web address of the CyberData VoIP products.
CyberData’s VoIP Discovery Utility program is available at the following website address:
http://www.cyberdata.net/assets/common/discovery.zip
Note The device ships in DHCP mode. To get to the Home page, use the discovery utility to scan
for the device on the network and open your browser from there.
2. When prompted, use the following default Web Access Username and Web Access
Password to access the Home Page ( Figure 2-13 ):
Web Access Username: admin
Web Access Password: admin