Quick Start Guide
931215B
The IP Endpoint Company
1.0 Out-of-Box and Prior to Final Installation
1.1. Verify that you have received all of the parts listed on the
Installation
Quick
Reference
placemat.
1.2. Download the current manual, otherwise known as an
Operation Guide
,
which is available in the
Downloads
tab on the following webpage:
http://www.cyberdata.net/voip/011376/
Note
You can also navigate to the
Downloads
tab by going to
and following the steps that are indicated by
the following figures:
2.0 Select Power Source
PoE Switch
PoE Injector
Set PoE power type to Class 0 = 13W
CAT6 cable recommended—
for longer distances
Be sure you are using a non-PoE switch or port
Make sure port is not in trunk mode
Set port to full duplex/ 100Mbps
1
3
Part Number: 011376
SIP RGB Strobe
4
2
SIP RGB Strobe
Quick Start Guide
