CYBELEC DNC 60 PS, User Manual

Page: 64 / 113

PAGE 54 USER GUIDE DNC 60 PS
3) Enter:
value
1
in the field
Clear variables zone ,
value
1
in the field
Clear punches-dies zone
and value
817
in the field EXECUTION CODE .
Press the key.
Press the key twice.
4) Enter:
value
1
in the field
Clear variables zone ,
value
1
in the field Clear punches-dies zone ,
value
1
in the field
Clear machine parameters zone
and value
817
in the field
EXECUTION CODE
.
Press the key.
Press the key twice.
The clearing of the machine parameters deletes also all the input / output
configuration defined by the operator.
It is therefore advisable to re-configure the DNC 60 before the next use.
Attention : If you use an external system for the data re-introducing
(CYBACK via RS232) and the problem persists, then the information re-
entered by this system has to be called into question.
The best to do in this case is to delete again the whole contents of the DNC
and to re-program the DNC manually via the keyboard (not the RS232 line).