CYBELEC DNC 60 PS User Manual Download

Page: 106 / 113

PAGE 96

USER GUIDE DNC 60 PS

HANGE PASSWORD

It is possible to modify the passwords attributed by default.

Certain users can do it for themselves, others not. In order to know the au-
thorizations, see

Table of users, access and passwords

To change a password:

Press the keys combination

The message

LEVEL ?

appears.

Type the level number you want to log in.

The

message

VALUE ?

appears.

Introduce the password corresponding to the requested level and vali-

date with the

key.

Then select the keys combination

The message

LEVEL ?

appears.

Program the level on which you want to modify the password.

The message

IGNORE

appears if the requested level is superior to the

"logged" level, in the contrary, the message

VALUE ?

appears.

Introduce the desired new password and validate with the

key.

The

message

CONFIRM

appears.

Introduce the new password again and validate with

If the 2 registered passwords are identical, the message

is dis-

played.

If the 2 registered passwords are different, the user is invited to intro-

duce the 2 passwords again, the message

VALUE

is displayed.

At the end of the intervention, don't forget to pass to level

in order

to leave the current level.

Summary of Contents for DNC 60 PS


















































































































Search results

Summary of Contents for DNC 60 PS

Reviews:

Related manuals for DNC 60 PS

Brands by name

Popular brands

CYBELEC DNC 60 PS, User Manual

Search results

Summary of Contents for DNC 60 PS

Reviews:

Related manuals for DNC 60 PS

Brands by name

Popular brands