Gate1 activates Envelope Generator 1 (with fixed connection to Gate1) and/or Envelope
Generator 2. The selection is made by MASTER CONTROLLER selector switches GATE 1
1-off-2 and GATE 2 1-off-2 on the front panel. Gate1 can also control LFO Sync via a switch
in the LFO Gate1-Gate2 section.
Trigg1 is used to retrigger Envelope Generators (attack and decay portion of envelope signal). This can
be disabled by MASTER CONTROLLER selector switches TRIGG 1 1-off-2 and TRIGG 2 1-off-2 on the
front panel.
Connections
CV1 is accessible from both the front and rear panels, see the figures below. Gate1 is accessible as an
output on the rear panel in the MIDI CONVERTER OUTPUTS section. Gate 1 can be complemented by
the signal GATE in the ANALOG INPUTS section on the rear panel. Trigg1 is accessible as an output on
the rear panel in the MIDI CONVERTER OUTPUTS section. TRIGG1 can be complemented by the
signal TRIGG in the ANALOG INPUTS section on the rear panel.
27
Gate2/Trigg2
Function
Gate2 and Trigg2 follow Note-On messages on the selected MIDI-c 1. This is useful,
for example when using the selected MIDI channel for melodies and main rhythm patterns, and
the selected MIDI c 1 for added rhythm patterns.
When a Note-On message on MIDI c 1 is received, the corresponding Gate2 goes
(actively) high and Trigg2 produces a short pulse. When the corresponding Note-Off message
comes, Gate2 goes actively low. The notes with numbers lower than 24 are ignored by default
but can be reprogrammed to provide a total register of 10 octaves.
If several Note-On messages are received in sequence Gate2 is held (actively) high the entire
time and a new Trigg2 pulse is generated. Five simultaneous Note-On messages can be stored
in the memory.
Gate2 can control Envelope Generator 2 via MASTER CONTROLLER selector switch GATE 2
1-off-2 on the front panel. Gate 2 can also control LFO Sync via a switch in the LFO Gate1-Gate2
sec tion.
Trigg2 is used to control Envelope Generator 1 or Envelope via MASTER CONTROLLER
selector switches TRIGG 1 1-off-2 and TRIGG 2 1-off-2 on the front panel.
Connections
Gate2 is accessible as an output on the rear panel in the MIDI CONVERTER OUTPUTS section.
Trigg2 is accessible as an output on the rear panel in the MIDI CONVERTER OUTPUTS section.
The following two drawings show the MIDI GATES & TRIGGERS at the bottom left of the front panel
and the MIDI CONVERTER OUTPUTS on the rear panel.
MIDI outputs and pre-patched Envelope Generators Gate/Trigg inputs at bottom left on Front Panel
Rear Panel, MIDI Converter outputs
