16
current user.
Press the M pad again, the screen will show the average of all reading taken between
4:00 A.M. and 11:50 P.M. The screen will display the sun icon.
When you press the M (Memory) pad a third time, the screen will show the average of
all readings taken between 6:00 P.M. and 11:59 P.M.. The screen will display the moon
icon.
After 30 seconds, the screen will display the last taken value. You can continuously
press the M (Memory) pad to view each value individually.
5.7.Discontinuing a measurement
If it is necessary to interrupt a blood pressure measurement for any reason (e.g., the
patient feels unwell), the START/STOP button can be pressed at any time. The device
then immediately lowers the cuff pressure automatically and enters sleep mode.
5.8. Setting the medication reminder
This instrument allows you to set two alarm times at which an alarm signal will then
be triggered. This can be a useful aid, for instance as a reminder to
take medication or to remind you to take your blood pressure at the
same time each day.
1. To set an alarm time, press the TIME button (the instrument
must have been switched off beforehand), and immediately
afterwards the "M" button, and hold both down until the bell
symbol appears in the bottom left of the display. Then release
both buttons. The flashing "1" in the display indicates that the
first alarm time can now be set.
2. Press the TIME button to set the hours – the hours display
flashes and pressing the "M" button allows you to set the alarm
hour. To confirm, press the TIME button.
