15
5.5. Memory – displaying the last 120 measurements
At the end of a measurement, this monitor automatically stores each result with date
and time. This unit stores 120 memories for each of 2 users.
Viewing the stored values
With the unit off, press the "M" button. The display first shows "A," then shows an
average of all measurements stored in the unit. Please note: Measurements for each
user are averaged and stored separately. Be certain that you are viewing the measure-
ments for the correct user.
Pressing the "M" button again displays the previous value. To view a particular stored
memory, press and hold the "M" button to scroll to that stored reading.
Memory full
When the memory has stored 120 results, a new, measured value is stored by
overwriting the oldest value.
Clear all values
If you are sure that you want to permanently remove all stored values,
hold down the "M" button (the instrument must have been switched off
beforehand) until "CL" appears and then release the button. If you do not
want to clear the values, press the START/STOP button. To permanently
clear the memory, press the "M" button while "CL" is flashing.
Individual values cannot be cleared.
5.6 Morning / Evening Hypertension Average
Morning Hypertension usually occurs as a surge in blood pressure upon waking up, this
Blood Pressure Monitor (BPM) will average readings taken between 4:00 A.M. and
11:50 A.M.. Evening hypertension, sometimes called nocturnal hypertension, is charac-
terized by high blood pressure that persists from night time until early morning; this BP
monitor will average reading taken between 6:00 P.M. and 11:59 P.M..
With the unit off, press the M (Memory) pad to display the average reading for the
1