29
/
CUTTERS EDGE FIRE RESCUE SAWS
I
nstalling The Tool-Less
Guard/Depth Gauge
®
The Inner Section
Place the inner section over the chain and
guide bar, sliding the mounting slots (A) onto
the locking key (B) and mounting bolt (C) on
the guard deflector. Push down to lock in
place. (Fig. 18 & 19).
The Guard/Depth Gauge Outer Section
With Lanyard and Quick Release Safety
Pin (Fig. 20)
Place the outer section onto the guide bar and
slide it over the inner section. Insert the safety
pin into the hole on the guard deflector, above
the locking key. Insert the Adjustment knob
shaft through the slot in the outer section and
screw into the threaded hole.
Fig. 18. Slide mounting slots (A) onto locking key (B)
and bolt (C)
Fig. 19 . Push down to lock in place
Fig. 20 . Completed Installation
Safety Pin
Adjustment Knob
(A)
(B)
(C)
