Section 2
Connection to the computer
2.1 Installation of power adapter
The cutter uses a 16V/2.5A adapter.
Steps 1:
A. Plug power adapter into mini cutter.
B. Plug power lead from adapter to mains AC power. .
Steps 2:
A. Make sure the power is switched off.
B. Connect the USB cable supplied from the Mini cutter to your computer.
C. Turn on your computer and then turn on the Mini cutter. You should turn on
the computer first then turn on the Mini cutter. The blade carriage will return
to the original position.
2.2 Setup of the driver and software
Steps 1:
Install the driver and check the parameters
If using a USB port,turn on the computer first, and insert CD into the computer,
then turn on the Mini cutter, t his program runs by itself and finish installing driver.
After installation, wait about 15 seconds the plotter will as a windows device
automatically add to the printer item.
6