Cutech 40200H-CT, User Manual

Page: 8 / 31

8
following sources:
Power Tool Institute American National Standards Institute
1300 Summer Avenue 23 West 43
rd
Street, 4
th
Floor
Cleveland, OH 44115-2851 New York, NY 10036
www.powertoolinstitute.org www.ansi.org
National Safety Council ANSI 01.1 Safety Requirements for
1121 Spring Lake Drive Woodworking Machines and the
Itasca, IL 60143-3201 U.S. Department of Labor Relations
www.osha.gov
PRODUCT SAFETY
1. Serious personal injury may occur if normal safety precautions are overlooked or ignored.
Accidents are frequently caused by lack of familiarity or failure to pay attention. Obtain advice
from supervisor, instructor, or another qualified individual who is familiar with this machine
and its operations.
2. Every work area is different. Always consider safety first, as it applies to your work area.
Use this machine with respect and caution. Failure to do so could result in serious personal
injury and damage to the machine.
3. Prevent electrical shock. Follow all electrical and safety codes, including the National
Electrical Code (NEC) and the Occupational Safety and Health Regulations (OSHA). All
electrical connections and wiring should be made by qualified personnel only
4. WARNING! TO REDUCE the risk of electrical shock. DO NOT use this machine outdoors.
DO NOT expose to rain. Store indoors in a dry area.
5. STOP using this machine, if at any time you experience difficulties in performing any
operation. Contact your supervisor, instructor or machine service center immediately.
6. Safety decals are on this machine to warn and direct you to how to protector yourself or
visitors from personal injury. These decals MUST be maintained so that they are legible.
REPLACE decals that are not legible.
7. DO NOT leave the unit plugged into the electrical outlet. Unplug the unit from the outlet when
not in use and before servicing, performing maintenance tasks, or cleaning.
8. WARNING! DO NOT handle the plug or planer with wet hands
9. USE only accessories as described in this manual and recommended by CUTECH.
10. DO NOT pull the planer by the power cord. NEVER allow the power cord to come in contact
with sharp edges, hot surfaces, oil or grease.
11.
ALWAYS turn the power switch “OFF” before unplugging the planer.DO NOT unplug the
planer by pulling on the power cord. ALWAYS grasp the plug, not the cord.
12. REPLACE a damaged cord immediately. DO NOT use a damaged cord or plug.
13. DO NOT use the planer as a toy. DO NOT use near or around children.