CUSTOM-TIP!!!
CUSTOM-TIP!!!
CUSTOM-TIP!!!
CUSTOM-TIP!!!
CUSTOM-TIP!!!
-Using 400 Grit Sandpaper in a“Figure 8” pattern, it is
best to sand the surfaces of both the 4358 Diff Ring
and 4360 Thrust Washers. The textured surface
results in a smoother and longer lasting diff.
4133 Qty 2
3/8 x 1/4 Bearing
1:1
4361 Qty 1
Diff Bolt Cover
-Parts for
Step#1
4362 Qty 1
Diff Spring
8035 Qty 2
Diff Ring
4125 Qty 1
Right Outdrive
-Parts for
Step#2
1:1
4129 Qty 1
Diff Bolt
1:1
4359 Qty 6
Thrust Balls
- Slide a 4360 Thrust Washer onto the Diff Bolt.
- Apply a thick layer of Diff Lube to the Thrust Washer, press (6) 4359 Thrust
Balls into the Diff Lube.
- Slide the other Thrust Washer on the Diff Bolt and insert it into the 4125
Right Outdrive.
- Press (1) 4130 Bearing into the Outdrive.
- Put (1) 4358 Diff Ring on the Outdrive, apply Diff Lube as shown.
- Insert the allen key as shown to temporarily retain the diff screw.
- Put (1) 8035 Diff Ring onto the 4126 Left Outdrive, apply Diff Lube as shown.
- Install the 4362 Diff Spring and 4361 T-nut into the Outdrive.
- Carefully slide the diff assembly together so the Diff Bolt passes thru the entire assembly and threads into the T-nut.
- Thread the Diff Bolt outdrive with the allen key into the assembled outdrive with the T-nut until you feel the Diff Spring
begin to compress. DO NOT OVERTIGHTEN!!!
- Press a small amount of Diff Grease into
each of the small holes in the 4887 Diff
Gear.
- Press (1) 4130 Bearing and the (12) 4132 Diff Balls into
the Diff Gear.
STEP #1
STEP #2
4360 Qty 2
Thrust Washer
4361
4361
4359
4360
4125
4130
8035
4126
4130
8035
4132
x12
4887
4362
4361
4126 Qty 1
Left Outdrive
4887 Qty 1
Diff Gear
4132 Qty 12
Ceramic Diff Balls
4361 Qty 1
Diff T- Nut
DIFF
LUBE
DIFF
LUBE
DIFF
LUBE
Diff Assembly
Diff Assembly
Diff Assembly
Diff Assembly
Diff Assembly
