11
NOTE:
- When your Cellular Phone battery is at low charge, the
Bluetooth connection may occasionally be lost. To keep
good connectivity ensure that your Phone battery is
adequately charged.
- In case of failure of Bluetooth pairing:
* Delete item in paired list on your cellular phone.
* Reset both phone by power off/on and the unit by ACC
off/on.
6. Using the Audio Unit as a Handsfree Device
1) When the Audio Unit is ringing, it appears “CALL FROM”
and then Phone Number on the display.
2) To accept call
To accept call, press CALL button, it appears “TALKING”
on the display.
3) To end call
To end call, press CALL END button, it appears “DROP
CALL” on the display.
5. Bluetooth Connection and Disconnection
1) When established Bluetooth connection between this unit and the
Cellular Phone, Bluetooth Icon on the display appears.
2) To disconnect Bluetooth Link
Press CALL END button for about 2s, it shows DISCONN and
disappears Bluetooth Icon on the display.
3) To connect Bluetooth Link
Simply press CALL button, it blinks Bluetooth Icon on the display
while Bluetooth is being connected. Once the connection is
completed, it appears Bluetooth Icon on the display.
NOTE:
- This function will cause of a disconnection of Bluetooth
link in some Nokia phones, but you do not worry just press
CALL button during private conversation, then switch back
to the Audio Unit automatically.
- The quality of calling between Cellular Phone and Audio
Unit is better than calling between one Audio Unit and
another one.
8. Last Number Dialing
Simply press CALL button, it appears “REDIALING” and then
appears CALLING on the display. And automatically make the
last call.
NOTE: If you are using Samsung phone, then you may need
to press once more Send button. First press button
shows phone contact list in your phone, then second
press makes the last call.
4) To reject call
To reject call, press CALL END button when ringing, it
appears “REJECT CALL” on the display.
NOTE: If reject call is activated in your Audio unit, then your
cellular phone does not support Reject Call function.
7. Audio Transfer Between the Audio Unit and Phone
Simply press CALL button during conversation, it disappears
phone icon on the display and the calling being switched
from Audio unit to Cellular Phone. To switch back to the
Audio Unit, press CALL button again, it appears phone icon.
Bluetooth Operation
10
Bluetooth Operation
5
6
19
3. Pairing in Hands Free modes
1) Press and Hold CALL button (5) for 2 seconds until you hear
beep sound, then PAIR STR appears and Bluetooth Icon blinks
on the display.
2) For the next procedure, go to “Cellular Phone Pair Mode”.
3) If it is in pairing status with Audio Unit and Cellular Phone,
PAIRING will show on the display.
4) If you want to exit pairing mode, press and hold CALL button
for 2 seconds while pairing, then it appears PAIR NG on the
display.
5) CONN OK appears on the display and Bluetooth Icon remains
steady when pairing is successful.
1. Using a Bluetooth wireless connection
Your Unit supports Bluetooth wireless technology. You can set
up a wireless link with Bluetooth cellular phone.
2. Pairing Your Audio Unit and Bluetooth Phone
This Audio Unit supports Hand Free profile, Headset profile,
A2DP (Audio Advanced Distribution profile) and AVRCP
(Audio Video Remote Control profile).
6) The Cellular Phone should confirm that it has established a new
paired connection.
7) Close the menu. The Pairing is now completed. CONN OK
appears on the display and Bluetooth Icon remains steady.
8) If the pairing failed, it appears PAIR NG on the display.
NOTE:
- Each cellular phone type has distinct phone menu, so you may need
to refer to your manufactures instruction for the correct procedure
on how to connect a new Bluetooth device.
- Please retry to the pairing instruction if CSS-5930BT not appear
on the cellular phone screen.
- Please select authorized, if there is authorized menu in the menu
of Bluetooth connection in your cellular phone.
- Once the Bluetooth pairing is completed between your cell phone
and the unit, the both units will be automatically recognized on its
pairing and when you turn on the key in your car even though this
unit is turned off.
- The connecting priority will be given to the last connected Cellular
Phone.
4. Cellular Phone Pairing mode
1) Browse your Cellular Phone menu to find the connectivity or
Bluetooth connection section.
2) Select “search for” a new Handsfree device function and allow
the phone to find the device.
3) CSS-5930BT should appear on your Cellular Phone screen.
4) Press connect menu among the Handsfree option on your
cellular phone.
5) The Cellular Phone should prompt for a pin code. Insert
pin code “0000”.
