Maintenance & Troubleshooting Manual
HB-P527
SUPO-643
REV A
7
SECTION 1 | SAFETY
1.3 | SAFETY GUIDELINES
Maintenance Lock
The maintenance lock must be placed into position whenever the machine is being serviced in the raised or
partially raised position. Serious injury and/or death could result if maintenance lock is not used properly.
FIGURE 1: Maintenance Lock Use
FIGURE 2: Maintenance Lock Storage
WARNING
FAILURE TO COMPLY WITH THE LISTED SAFETY
PRECAUTIONS MAY RESULT IN MACHINE DAM-
AGE, PERSONNEL INJURY, OR DEATH.
Other Guidelines
• Never work under an elevated platform until maintenance locks have been engaged.
• Remove all rings, watches, and jewelry when performing any maintenance.
• Do not wear long hair unrestrained or loose fitting clothing and neckties which may become caught
on or entangled in equipment.
• Observe and obey all warnings and cautions on machine and in manual.
• Keep oil, grease, water, etc. wiped from standing surfaces and handhold’s
• Before making any adjustments, lubricating or performing any other maintenance, shut off all power
controls.
• Battery should always be disconnected during replacement of electrical components.
• Keep all support equipment and attachments stowed in their proper place.
• Use only approved nonflammable cleaning solvents
• After maintenance, inspect the machine as described for Pre-delivery
