Maintenance & Troubleshooting Manual
HB-P527
SUPO-643
REV A
13
SECTION 3 | MAINTENANCE CHECKLISTS
3.2 | FREQUENT INSPECTION CHECKLIST
AERIAL PLATFORMS SHALL BE INSPECTED, SERVICED, AND
ADJUSTED TO MANUFACTURER’S REQUIREMENTS BY A
QUALIFIED MECHANIC PRIOR TO EACH SALE, LEASE, OR
RENTAL, AND EVERY 3 MONTHS OR 150 HOURS, WHICH-
EVER COMES FIRST.
CAUTION
Model Number:
Serial Number:
• Use proper operating, service, and maintenance manual for specific information and settings
• If an item is found to be unacceptable make the necessary repairs and check the “repaired” box.
• When all items are “acceptable”, the unit is ready for service.
• If an item is found to be unacceptable, make the necessary repairs and check the “repaired” box.
When all items are “acceptable,” the unit is ready for service.
Y - Yes/Acceptable N - No/Unacceptable R - Repaired
Description
Y N
R
Visual Inspections
Perform all the checks on the Pre-Start Inspection Checklist.
□ □ □
Inspect the condition of hydraulic fluid in reservoir. Oil should have a clear amber color.
□ □ □
Inspect the entire machine for signs of damage, broken welds, loose bolts, or improper repairs.
(Check for corrosion, cracking, abrasion, etc.)
□ □ □
Check that all snap rings are secure in grooves on pivot pins
□ □ □
Check if tires are leaning in or out.
□ □ □
Verify that bubble level is in place.
□ □ □
Verify that maintenance and inspection records are up t o date.
□ □ □
Check the tires for damage.
□ □ □
Check the hydraulic fluid level with the platform fully lowered.
□ □ □
Functional Tests
Perform all check on Pre-Start inspection checklist.
□ □ □
Functions operate smoothly
□ □ □
Functions operate over full range of motion
□ □ □
Emergency lowering — Manual override functions properly
□ □ □
Check that the platform does not drift down with a full load
□ □ □
Wheels lubricated if needed
□ □ □
Comments:
Date:
Inspected By:
