Custom Audio Electronics TG2480HIII, User Manual

Page: 51 / 80

To set a negative value of the “Black Mark Distance” parameter is useful in cases where the alignment point refers to the
black mark printed on the previous ticket or where the desired cutting line is placed in the middle of the alignment black
mark. In the following images, the value of “Black Mark Distance” parameter is set to -A.
PRINTING DIRECTION
0
-A
Black mark
front
Alignment
point
The following igure shows a section of the device with the paper path and the distances between the alignment sensor,
the printing head and the autocutter (cutting line), where:
A = distance between the alignment sensor and the printing line = 12 mm
B = distance between the printing line and the cutting line = 12.5 mm
B A
51