Q3x ETH
DEVICE NAME AND
FIRMWARE MODULES
RELEASE
PRINTER SETUP
PRINTER TYPE .............................. <device model>
PRINTING HEAD TYPE .................. <head model>
INTERFACE ..........................................ETHERNET
PROGRAM MEMORY TEST.................OK
STATIC RAM TEST...............................OK
EXTERNAL MEMORY TEST ................OK
CUTTER TEST......................................OK
HEAD VOLTAGE
[V] = 23.70
HEAD TEMPERATURE
[°C]
= 25
POWER ON COUNTER
= 4
PAPER PRINTED
[cm]
= 40
CUT COUNTER
= 1
[Network configuration]
DHCP Client .............................. :
Disabled
IP Address ................................. :
192.168. 10. 52
Subnet Mask .............................. :
255.255.255. 0
Default Gateway ........................ :
192.168. 0. 5
[Ethernet]
MAC Address Ethernet ............... :
00-00-00-00-00-00
Autofeed .......................................... :
CR Disabled
Print Mode ....................................... :
Normal
Chars / inch ..................................... :
A=15 B=20 cpi
Speed / Quality................................ :
Normal
Black Mark Alignment ..................... :
Enabled
Black Mark Threshold..................... :
40%
Black Mark Distance [mm].............. :
+15
PaperEnd Buffer Clear .................... :
Disabled
Font Type......................................... :
International
Code Table [num] ............................ :
00
Print Density.................................... :
0%
[ PUSH ]
key to enter setup
[ FAST PUSH ]
key to skip setup
<device>
SCODE <code>
-
rel.
FCODE <code>
-
rel.
KEYS FUNCTIONS
DEVICE
STATUS
DEVICE
CONFIGURATION
PARAMETERS
39
