Custom Audio Electronics MY3, User Manual

Page: 89 / 96

10.3 Printing area
In order to print ticket containing only one black mark and to not overlay printing to a black mark (that will make it useless
for the next alignment), it is important to well calibrate the height of the printing area of ticket according to the inter-black
mark distance.
The following igure shows an example of tickets.
Tearing
line
Printing
line
PRINTING
AREA
PRINTING DIRECTION
Tearing
line
Printing
line
B
L
H
C
A
D
B
A “width black mark” = 4÷12 mm
B “Distance between black mark front/Tearing line” = 19 mm (ixed distance)
C ”Distance between black mark front/Printing line” = 10 mm (ixed distance)
D ”Distance between Printing line/Tearing line” = 9 mm (ixed distance)
H Distance between the irst and the last print line, called “Height of the printing area”
L Ticket length.
To use all the black marks on the card, you must comply with the following equation::
H + D ≤ L
89