Custom Audio Electronics MY3, User Manual

Page: 28 / 96

Once pairing is completed, do not turn
off Bluetooth communication. Otherwise,
communication will be interrupted.
Bluetooth
I O
Paired deviceas
<device_BT ADDRESS>
<Bluetooth device>
<Dispositivo Bluetooth>
Available devices
9
NOTE: To print with a device Android you need to install
the application CUSTOM PRINT available in the DOWN-
LOAD of the site https://www.custom.biz.
iOS
Turn on the printer and print
a setup report (see par. 5.1).
Write down the BT ADDRESS parameter.
PRINTER SETUP
PRINTER TYPE = <device name>
HEAD VOLTAGE [V] = 07.64
HEAD TEMPERATURE [°C] = 20
PIN BT = 1234
BT Address = <BT address>
BT Module Build Rel = <release>
Interface ........................................ :
Bluetooth
BT Autoreconnect .......................... :
Disabled
USB Address Number ...............:
0
HEAD VOLTAGE [V] = 07.64
HEAD TEMPERATURE [°C] = 20
PIN BT = 1234
BT Address = <BT address>
BT Module Build Rel = <release>
Interface ........................................ :
Bluetooth
BT Autoreconnect .......................... :
Disabled
USB Address Number ...............:
0
Pairing BT..................................:
Disabled
Autofeed ....................................:
CR Disabled
Print Mode .................................:
Normal
Speed / Quality..........................:
High Speed
Chars / inch ...............................:
A=17 B=22 cpi
Make sure that the INTERFACE parameter on the
printer is set to BLUETOOTH and, for MY3-A model,
that the BT AUTORECONNECT parameter is set to
DISABLED (see chapter. 5).
1
2
3
28