Custom Audio Electronics MY3, User Manual

Page: 48 / 96

COLUMNS 22 CPI
Select the number of columns:
60 col
D
64 col
NOTE: The parameter COLUMNS 22 CPI is displayed only in case that the parameter
CHARS/INCH is A=17 B=22 cpi.
POWER OFF TIME
Inactivity time of device
None 4 hours
30 min
D
6 hours
1 hours 8 hours
2 hours
BLACK MARK ALIGNMENT
Alignment management:
Disabled D = the black mark alignment is not performed
Enabled = the black mark alignment is performed
BLACK MARK DISTANCE
BLACK MARK DISTANCE is the minimum distance (in mm) between the upper edge
of ticket and the black mark (see chapter 10).
The numeric value of the distance is made up with the following four parameters for
the setting of three digits (two for the integer part of the number, one for the decimal
part and of the sign):
BLACK MARK DISTANCE [mm x 10]
Setting the digit for tens:
0 D 2 4 6 8
1 3 5 7 9
BLACK MARK DISTANCE [mm x 1]
Setting the digit for units:
0 D 2 4 6 8
1 3 5 7 9
BLACK MARK DISTANCE [mm x .1]
Setting the digit for decimals:
0
D
2 4 6 8
1 3 5 7 9
NOTES:
For example, to set the black mark distance to 15 mm, modify the parameters as follows:
BLACK MARK DISTANCE [mm x 10] = 1
BLACK MARK DISTANCE [mm x 1] = 5
BLACK MARK DISTANCE [mm x .1] = 0
If the BLACK MARK ALIGNMENT parameter is disabled, the parameters for the BLACK
MARK DISTANCE are not printed.
PRINT DENSITY
Adjusting the printing density:
-50% -12% +25% Label
-37% 0
D
+37%
-25% +12% +50%
48