SPEED / QUALITY
Setting of printing speed and printing quality:
Normal
D
High Quality
PRINT WIDTH
Printing area width:
48 mm
54 mm
60 mm
66 mm
72 mm
78 mm
50 mm
56 mm
62 mm
68 mm
74 mm
80 mm
D
52 mm
58 mm
64 mm
70 mm
76 mm
LOW PAPER
Setting the optional low paper sensor:
Disabled
D
= Sensor disabled
Enabled
= Sensor enabled
OUTPUT MOUTH
Setting the paper jam and output paper presence sensors on the optional bezel:
Disabled
D
= Sensors disabled
Enabled
= Sensors enabled
PAPEREND BUFFER CLEAR
Cleaning mode of the data in receive buffer, if the printing is stopped due to lack of paper:
Disabled
D
= the data remain in the receive buffer. When the paper runs out, the device
keeps the remaining data in the receive buffer and prints the remaining
portion of the ticket after that the new paper is loaded.
Enabled =
when the paper runs out, all data in the receive buffer are deleted.
PRINT DENSITY
Adjusting the printing density:
-25% 0%
D
+25%
-12% +12%
The print quality is strongly inluenced by the type of chemical treatment and the type
of storage to which the thermal paper has been subjected, as well as by the weight of
the same. It may therefore necessary to act on this parameter to obtain the desired
print quality.
38
