The following igure shows the setup report of the device. The shown values for parameters are sample values; for the list
and the description of device parameters see the following paragraphs.
DEVICE NAME AND
FIRMWARE MODULES
RELEASE
PRINTER SETTINGS
PRINTER TYPE .............................. <device model>
PRINTING HEAD TYPE .................. <head model>
INTERFACE ..........................................USB
PROGRAM MEMORY TEST.................OK
CUTTER TEST......................................OK
HEAD VOLTAGE
[V] = 24.64
HEAD TEMPERATURE
[°C]
= 29
POWER ON COUNTER
= 12
PAPER PRINTED
[cm]
= 280
CUT COUNTER
= 20
RS232 Baud Rate ........................... :
115200 bps
RS232 Data Length ......................... :
8 bits/chr
RS232 Parity ................................... :
None
RS232 Handshaking ....................... :
Hardware
Busy Condition ................................ :
RxFull
USB Address Number ..................... :
0
Print Mode ....................................... :
Normal
Autofeed .......................................... :
CR Enabled
Chars / inch ..................................... :
A=17 B=22 cpi
Code Table [num] ............................ :
00
Font Type......................................... :
International
Speed / Quality................................ :
Normal
Print Width ....................................... :
80 mm
Low Paper ....................................... :
Disabled
Output Mouth................................... :
Disabled
Black Mark Position ......................... :
Enabled
Black Mark Threshold...................... :
40%
Black Mark Distance [mm]............... :
+15
USB Virtual COM............................. :
Disabled
PaperEnd Buffer Clear .................... :
Disabled
Print Density.................................... :
0%
[ PUSH ]
to enter setup
[ FAST PUSH ]
to skip setup
<device>
SCODE <code>
-
rel.
FCODE <code>
-
rel.
KEYS FUNCTIONS
DEVICE
STATUS
PARAMETERS
FOR DEVICE
CONFIGURATION
32
