Custom Audio Electronics Kube Scanner 120, User Manual

Page: 36 / 88

PAPEREND BUFFER
CLEAR
Cleaning mode of the data in receive buffer, if the printing is stopped due to lack of paper:
Disabled = The data remain in the receive buffer. When the paper runs out, the device
keeps the remaining data in the receive buffer and prints the remaining
portion of the ticket after that the new paper is loaded.
Enabled D
= When the paper runs out, all data in the receive buffer are deleted.
POWERFAIL
WAKEUP MODE
This parameter set the printer state (ON or OFF) that will be automatically restored after
a power fail:
LAST PWR State
D = the printer returns in the previous state (ON or OFF) before the
power fail.
Always ON = the printer always switches on automatically, after a power fail.
Always OFF = the printer switches on only by pressing the ON/OFF key after a
power fail.
PRINT DENSITY
Adjusting the printing density:
-50% -12% +25%
-37% 0
D +37%
-25% +12% +50%
36