Custom Audio Electronics KPM150H, User Manual

Page: 61 / 96

7.9 Speci fi cations for ticket with labels
Paper with labels is managed by setting the “Ticket Management” parameter to “Short Label” value (see chapter 10).
The following
fi gure shows an example of paper with labels:
PRINTING DIRECTION
Ticket margin
Edge used for notch alignment
D
C
A
B
where
D = width of paper used (from 20mm to 54mm).
A = space between two labels (A
≥ 3mm)
B = distance from the edge (B ≤ 2mm)
C = the minimum managed length = 40mm (C ≥ 40mm).
7.10 Speci fi cations for ticket with hole
The printer manages tickets with lateral gap. Set the “Notch position” parameter (see printer setup) with “Transparent”
value for print and cut the ticket. The following
fi gure shows an example for ticket with lateral gap.
Ticket margin
Side hole
Sensor axis
PRINTING DIRECTION
7
3
3
where
L = width of paper used (from 20mm to 54mm).
H = minimum height of hole (2mm)
D = minimum width of hole (10mm)
NOTE: The valid format of the ticket is ISO size 54 x 85mm
7. SPECIFICATIONS
User manual
KPM150H 61